Table of Contents
Advertisement
23. Driver Installation
Note: When operated in CC mode Stereo the ADI-2/4 Pro SE is fully compatible to Windows 10
(1709 or newer). An installation of RME drivers is still recommended. They add ASIO (PCM, DSD
DoP and DSD Native) and 768 kHz WDM. They are also required for firmware updates and
DIGICheck. Additionally the Multi-channel mode is not fully working in Windows 10 (tested with
1803). Further information on operation without RME driver can be found in chapter 34.26.
RME is constantly improving their drivers. Please download the latest driver from the RME web-
site at http://rme.to/downloads, driver_madiface_win_09784.zip or newer. Unzip the down-
loaded file and start the driver installation by a double-click on rmeinstaller.exe. Follow the in-
structions of the installer. After installation connect computer and ADI-2/4 Pro SE. Windows de-
tects the new hardware as ADI-2/4 Pro SE and installs the drivers automatically.
After a reboot, the icon of the Settings dialog appears in the notification
area. Windows might hide it behind the triangle or upwards symbol. Click
on it to access it and to configure its appearance.
Chapter 34.3 explains how to find the ideal USB port.
Driver Updates do not require to remove the existing driver. Simply install the new driver over
the existing one.
Possible reasons why an ADI-2/4 Pro SE is not found automatically:
The ADI-2/4 Pro SE is not switched on
The USB port is not active in the system (check the Device Manager)
The USB cable is not, or not correctly inserted into the socket
Use the ADI-2/4 Pro SE State Overview screen to verify USB is detected and working (chap-
ter 15.3)
De-installing the Driver
Usually a de-installation of the driver files is not necessary. Thanks to full Plug & Play support,
the driver files will not be loaded after the hardware has been removed.
Windows Plug & Play methods do not cover the registration of the ASIO driver. This entry can be
removed from the registry by a software de-installation request. This request can be found (like
all de-installation entries) in Control Panel, Programs and Features. Click on the entry 'RME MA-
DIface', then Uninstall.
To use Windows own Class Compliant drivers the RME driver has to be removed completely (for
example after a firmware update). In Device Manager select the ADI-2/4 Pro SE under Sound,
Video and Game Controllers, right click and choose Uninstall. In the next dialog make sure to
check 'Delete the driver software for this device'. Otherwise the driver will stay within the Windows
installation and gets reinstalled automatically after the next reboot.
Firmware Update
Please see chapter 7. Under Windows the flash update tool requires the MADIface series driver
to be installed, see above.
58
User's Guide ADI-2/4 Pro SE - v 1.0
Advertisement
Table of Contents
