Replacement Parts; Safety Instructions; General Information - Daikin DSC Series Installation Instructions Manual

Motor Sheave Adjustments ................................................ 11
Heat Pump Operation ......................................................... 12
Maintenance ...................................................................... 13
Troubleshooting .................................................................. 14
Appendix A Blower Performance Tables ............................. 15
Appendix B Electrical Data .................................................. 27
Appendix C Unit Dimensions ............................................... 32
Appendix D Wiring Diagrams .............................................. 33
Wiring Diagrams for Models with DDC Controls .................. 44

REPLACEMENT PARTS

O P
RDERING ARTS
When reporting shortages or damages, or ordering repair parts,
give the complete unit model and serial numbers as stamped
on the unit's nameplate.
Replacement parts for this appliance are available through your
contractor or local distributor. Your nearest distributor can be
located online at www.daikinac.com or by contacting:
EQUIPMENT SUPPORT
DAIKIN NORTH AMERICA LLC
19001 KERMIER ROAD
WALLER, TEXAS 77484
855-DAIKIN-1

SAFETY INSTRUCTIONS

T T I
O HE NSTALLER
Before installing this unit, please read this manual to familiarize
yourself on the specific items which must be adhered to, including
maximum external static pressure to unit, air temperature rise,
minimum or maximum CFM and motor speed connections.
Keep this literature in a safe place for future reference.
S ,
HEET METAL PARTS SCREWS
,
HAVE SHARP EDGES AND IT IS NECESSARY THAT THE INSTALLER AND
SERVICE PERSONNEL EXERCISE CAUTION
CAUTION
,
CLIPS AND SIMILAR ITEMS INHERENTLY
.
T
O AVOID PROPERTY DAMAGE
NOT USE THIS UNIT IF ANY PART HAS BEEN UNDER WATER
I
MMEDIATELY CALL A QUALIFIED SERVICE TECHNICIAN TO INSPECT
THE FURNACE AND TO REPLACE ANY PART OF THE CONTROL SYSTEM
AND ANY GAS CONTROL HAVING BEEN UNDER WATER
T
HIS UNIT MUST NOT BE USED AS A
DURING THE FINISHING PHASES OF CONSTRUCTION ON A NEW
. T
STRUCTURE HIS TYPE OF USE MAY RESULT IN PREMATURE FAILURE
OF THE UNIT DUE TO EXTREMELY LOW RETURN AIR TEMPERATURES
AND EXPOSURE TO CORROSIVE OR VERY DIRTY ATMOSPHERES
HIGH VOLTAGE!
D
ISCONNECT ALL POWER BEFORE SERVICING OR
. M
INSTALLING THIS UNIT ULTIPLE POWER SOURCES MAY
. F
BE PRESENT AILURE TO DO SO MAY CAUSE PROPERTY
,
DAMAGE PERSONAL INJURY OR DEATH
T
O PREVENT THE RISK OF PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH,
DO NOT STORE COMBUSTIBLE MATERIALS OR USE GASOLINE OR OTHER
FLAMMABLE LIQUIDS OR VAPORS IN THE VICINITY OF THIS APPLIANCE.

GENERAL INFORMATION

For complete information and installation instructions for models
with DDC controls, see manual DK-DDC-TGD-XXX.
T
O PREVENT PROPERTY DAMAGE PERSONAL INJURY OR DEATH
, ,
TO FIRE EXPLOSIONS SMOKE
SHOCK OR CARBON MONOXIDE
, ,
INSTALLED REPAIRED OPERATED
This unit is approved for outdoor installation ONLY. Rated per-
formance is achieved after 20 hours of operation. Rated per-
formance is delivered at the specified airflow. See product
specification sheet for light commercial models. Specification
sheets can be found at www.daikinac.com for Daikin brand
products. Within the website, please select the commercial
products menu and then select the submenu for the type of
product to be installed, such as air conditioners or heat pumps,
to access a list of product pages that each contain links to that
model's specification sheet.
To assure that your unit operates safely and efficiently, it must
be installed, operated, and maintained in accordance with
these installation and operating instructions, all local building
codes and ordinances.
2
WARNING
,
PERSONAL INJURY OR DEATH
.
.
WARNING
"
CONSTRUCTION HEATER
WARNING
.
WARNING
WARNING
, , ,
SOOT CONDENSATION ELECTRIC
,
THIS UNIT MUST BE PROPERLY
, .
AND MAINTAINED
,
DO
"
.
,
DUE