Table of Contents
Advertisement
ClimaCon F
Accessories and spare parts
4. Accessories and spare parts
You will find the current accessories and spare part list on
our website.
f
Call up the search on the website
www.oventrop.com by clicking on the magnifying
glass symbol and search for 1155.
f
Select your product.
Z
Here you can find all information on your product.
5. Transport and storage
Parameter
Temperature range
Relative air humidity
Particles
Mechanical influences
Weather influences
Chemical
influences
12
Value
0 °C to +50 °C
Max. 95%, non-
condensing
Store in a dry and dust-
protected place
Protected from
mechanical shock
Do not store outdoors
Protect from sunlight
Do not store together with
aggressive media
6. Installation
WARNING
Danger to life due to electric current !
There is a danger to life if live components are
touched.
!
Disconnect the product from the power supply
at all poles.
!
Check that no voltage is present.
!
Secure the product against being switched on
again.
!
Only install the product in dry indoor areas.
6.1
Tools required
•
Pen for marking the drill holes
•
Percussion drill with masonry drill bit
•
Slotted screwdriver or current tester
6.2
Loosening of the base plate
Fig. 6:
Loosening of the base plate
1
Press the release clip (position
5
7 or position
in Fig. 3 on page 8) down
slightly and detach the control unit from the base
plate.
2
Put the control unit to one side.
5
in Fig. 2 on page
115500983-V02.01.2022
Advertisement
Table of Contents
