Figure 34 Start Of Fw Flush - Deckma Hamburg OMD-24 Series Instruction Manual

Condition 2:
Setting the Autoclean-System
The Autoclean interval can be set to several cleaning intervals. It is possible to set the time delay
setting for Autoclean operation from minimum 1 min. to maximum 8 hours
possible to set the Autoclean system
is set to FW condition.
Timing:
About 2 seconds after switching FW-Valve to FW-input by software (see FW Flush "ON") or
externally (short terminals 19/20) a cleaning cycle is started automatically.
START OF FW FLUSH
Sample

Figure 34 Start of FW FLUSH

to "FWdriven". That starts a cleaning cycle, whenever the unit
FW
Piston movement
0 2
14
Page: 89
. Moreover, it is also
...
...
(t/s)
...