Specification Omd-24 A - Deckma Hamburg OMD-24 Series Instruction Manual

7.1 Specification OMD-24 A

Range:
Accuracy:
Linearity:
Display:
Power Supply:
Consumption:
Alarm Points 1 + 2:
Alarm 1 Operating Delay:
(for annunciation purpose)
Alarm 2 Operating Delay:
(for control purposes)
Alarm Indication:
(Alarm 1, 2 System Fault)
Alarm Contact Rating:
(Alarm 1, 2, System Fault)
Output Signal:
Sample/ Fresh Water Pressure:
Sample Flow:
Flow Meter:
Measuring Range:
Sample Water Temperature:
Ambient Temperature:
Roll:
Size:
(Computer Unit)
(EV-FC-Arrangement)
Weight:
Degree of Protection:
Pipe Connections:
 Technical specifications are subject to change without notification.
*By request the alarm set point can be set to 5 ppm max.
0 – 30 ppm, Trend indication 50 ppm
According IMO MEPC. 107(49)
0 – 30 ppm better than ± 2 %
Yellow Graphic Display
24 V AC or DC ± 10 %
< 10 VA
Adjustable between 1 – 15 ppm*
(Works adjustment 15 ppm)
Adjustable between 1 – 540 sec.
(Works adjustment 2 sec.)
Adjustable between 1 – 10 sec.
(Works adjustment 10 sec.)
Red LEDs
Potential free 1 pole change over contacts, 3 A
/ 240 V
0 – 20 mA or 4 – 20 mA selectable, active,
ext. Load < 150 
0 – 6 bar recommended range of installation
Approx. 2 l/min
Vortex Type:
0.7 – 4.5 l/min
+ 1 to + 65° C
+ 1 to + 55° C
Up to 45°
185 mm W x 210 mm H x 65 mm D
150 mm W x 290 mm H X 140 mm D
2.5 kg
IP 65
For 6 mm OD Cu or SS Pipe
Page: 36