Important Notes - Deckma Hamburg OMD-24 Series Instruction Manual

15 ppm bilge alarm
Table of Contents

Advertisement

2.

Important Notes

a) This equipment must be installed and operated in strict accordance with the
instructions contained in this instruction manual. Failure to do so will impair the
protection provided.
b) Installation and servicing must be undertaken by a competent and suitably skilled
person.
c) The equipment must be connected to the ground according relevant requirements.
d) The unit must be isolated from the electrical supply before any maintenance of the
equipment is attempted.
e) All national or local codes of practice or regulations must be verifying and, where
applicable, are deemed to take precedence over any directive or information
contained in this instruction manual.
f) In case of freezing conditions, the Measuring Cell should be emptied completely.
Some components mentioned in this instruction manual may not be present on the
instrument on site, and/or the instrument may have additional components.
g) Technical specifications are subject to change without notification.
h) If uncertain how to proceed, contact the maker.
Page: 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omd-24Omd-24 evOmd-24 evaOmd-24 aOmd-24 fc

Table of Contents