Emerson Fisher FIELDVUE DLC3020f Quick Start Manual page 16

DLC3020f Digital Level Controller
April 2022
Sensor Units
Select the appropriate sensor units for your application.
Note
Default units from factory are SI (Metric).
If you choose Mixed Units you must select the units for each sensor parameter.
Unit System—English Units, Metric/SI Units, Mixed Units
Length Units—mm, cm, m, in, or ft
3
Volume Units—mm , ml, L, in
Weight Units—oz, lb, g, or kg
Temperature Units—_F, _R, _C, or K
Torque Rate Units—NSm/deg, dyneScm/deg, lbfSin/deg
Fluid Density Units—degAPI, SGU (Specific Gravity) lb/in
g/ml, or g/L
Sensor Parameters
Enter the sensor parameters. Selections shown in the drop down are based on the sensor units chosen.
Displacer Length
Displacer Volume
Displacer Weight
Driver Rod Length
Instrument Mount Position
Note
Table 1 provides the driver rod length of 249 sensors with vertical displacers. If your sensor isn't included in table 1 refer to figure 12
to determine the driver rod length.
16
3
3 3
, lb/ft , lb/gal, degBaum hv, degBaum lt, kg/m
Quick Start Guide
D103470X012
3 3
, g/cm , kg/L,