Table of Contents
Advertisement
Selecting the scanning method
The scanning may be set for all memories or only specified memories.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [MEMORY]
The menu list will be displayed.
3
Touch [2 MEM SCAN TYPE] to select the scanning
method
The setting will switch between "ALL MEM" and
"SELECT MEM" each time it is touched.
ALL MEM: Scan all memories.
SELECT MEM: Scan only specified memories.
Tips
• The scanning method can also be selected by pressing
• Factory default value: ALL MEM
4
Press
for one second or longer
The scanning method will be set and the display will return to the previous screen.
Setting the specified memories
Specify the memories to be scanned when "2 MEM SCAN TYPE" is set to "SELECT
MEM" in the set-up menu.
The memory can be specified using either of the following two methods:
(1) Selects channels using the memory list screen
(2) Specifies individual channels using the function menu screen
(1) Specify memory channels using the memory list screen
1
Touch [V/M] for 2 to 3 seconds (until the beep
sounds)
The memory list screen will be displayed.
Signal Search
.
79
Advertisement
Table of Contents
