Table of Contents
Advertisement
Sending and Receiving Messages and Pictures
When operating in the digital mode, messages (text) and pictures can be sent and
received.
Messages and pictures sent or received will be saved in the common list in the memory.
Cautions
z When sending or receiving messages and pictures, use the
communications to the AMS (auto mode select function) or the digital mode.
z The operation of the radio will automatically switch to the digital mode on Band A when sending
messages and pictures.
z When the list of the data is displayed by touching [LOG] while operating on Band B, the operating
band will switch to Band A when returning to the frequency display screen.
z Set up the micro-SD card in the radio when downloading pictures. Refer to "Setting Up the micro-
SD card" (
P.33) for details.
Tip
The following are the three types of digital modes available. Refer to "Switching the communication
mode" (Page 45) for details.
• V/D mode (simultaneous voice / data communication mode)
• Voice FR mode (voice full-rate mode)
• Data FR mode (high speed data communication mode)
Viewing messages and pictures
The data sent or received can be viewed in the list. The contents of the data sent or
received can be verified by selecting it from the list.
1
Press
The function menu will be displayed.
2
Touch [LOG]
When [LOG] is not displayed in the function menu, touch
Tip
[BACK] or [FWD] to switch the menu.
The list of data will be displayed.
3
Turn
or touch the screen to select the data that
you want to check
Tips
• A list of the messages is displayed when the touch key
is
. This will be changed to a list of pictures when the
screen is touched and changed to
• Newly downloaded data will appear at the top of the list.
• Touch
• Touch [TOP] to display the top of the list.
126
to display the end of the list.
key before beginning to switch the
.
Advertisement
Table of Contents
