Yaesu FTM-400XDR/DE Operating Manual page 82

Signal Search
3
Touch [SKIP/SEL] to display "SKIP"
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
"OFF" → "SKIP" → "SELECT"
Tip Repeat Steps 2 and 3 to specify the other memories
next.
4
Touch [BACK]
Return to the previous screen, and a blinking "" will be displayed on the left side of
the memory channel number.
(2) Setting channels to be skipped individually using the function menu screen
1
Switch to the memory mode, and recall the memory channels that have been set to
be skipped
2
Press
The function menu will be displayed.
3
Touch [SKIP/SEL] to display "SKIP"
A blinking "" will be displayed on the left side of the
memory channel number.
Tip When [SKIP/SEL] is not displayed in the function menu,
touch [BACK] or [FWD] to change the menu.
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
"OFF" → "SKIP" → "SELECT"
82