Back; Left Side - Yaesu FTM-400XDR/DE Operating Manual

➆ F/MW key ( )
Press the button quickly to display the function menu.
Press the button for 2 seconds or longer to change to the memory writing mode.
➇ Band B DIAL knob (
• The frequency of the upper band in the dual band display can be adjusted.
Press the knob to enable setting the operating band frequency in 1 MHz units.
Press the knob for one second or longer to enable setting the frequency in 5 MHz units.
• In memory mode when the knob is pressed for one second or longer, if a tag
(name) is attached to the memory channel, the tag and frequency displays will be
reversed.
➈ GM key ( )
Press this key to start the group monitor function.
Press this key for one second or longer to DG-ID number setting screen is displayed.

Back

Œ
➀ CONTROL jack
Plug in the control cable into this jack to connect with the main body.
➁ Screw hole to attach the mounting bracket
Left side
Œ
Name and Function of Each Component
)

➀ EXT GPS jack
Plug in a cable to connect with external GPS devices.
15