Table of Contents
Advertisement
14.10Alarm management > Input
Only digital input 2 can be used to send emails, text messages, Internet text messages or to restart the
device.
After the device has accepted the configuration, the config-
uration is shown on the start page of the mbNET.mini in
the information under Step 1.
The state of Input 2's signal is shown with the prepended
soft-LED (grey = 0/low, green = 1/high). If an email, text
message or Internet text message has been configured, the
button "Test email" appears. Clicking this button will carry
out a test on the setting.
Input 1 can only be configured for establishing the connec-
tion, see Machines/Device Administration/Internet. Once
it has been configured accordingly, the description "In-
put 1" is shown. The state of the signal is shown with the
prepended soft-LED (grey = 0/low, green = 1/high).
Page 120 von 131 | Version: 2.2.1 - EN | Mar 28
NO T I CE
th
, 2022 |
Advertisement
Table of Contents
