Table of Contents
Advertisement
LED light codes
Designation
LED-Status
Pwr (Power)
green
flashing
Rdy (Ready)
green
The Con LED signals the connection status to the Internet and portalserver.
Con (Connect)
flashing (3Hz)
orange
flashing (1,5Hz)
Light codes of the LED Usr directly after the start of SIMPLY.connect *-capable devices:
flashes briefly
at intervals
(500 msec on -
Usr (User)
1500 msec off)
orange
Light codes of the LED Usr during operation:
flashing (3Hz)
Usr (User)
orange
flashing (1,5Hz)
orange flashing
WAN LED
green on
green off
orange flashing
LAN LED 1 – 3
green on
green off
* SIMPLY.connect is a web application that supports you when creating a device (industrial router mbNET) in the
Remote Service Portal mbCONNECT24.
You can find more information about SIMPLY.connect on our website at:
Page 16 von 131 | Version: 2.2.1 - EN | Mar 28
Description
Device power source is switched off or device is not connected to power
off
source/power pack.
on
Power source is connected to terminal block and switched on.
After the system has been checked and started (duration approx. 25 sec),
the LED flashes for the duration of the starting up process (approx. 90 sec).
on
The device is ready for operation.
off
No connection to Internet or portal.
Internet or VPN connection being established.
Connection to portal server has been established.
on
Connection to the Internet has been established.
SIMPLY.connect is available but not activated.
This means: The SIMPLY.connect * function is supported by the device.
As long as the function is not activated by pressing the Function button, the
device remains in "normal mode" and no further action takes place.
If you do not want to use the Simply.connect * function, simply ignore this
display.
on
SIMPLY.connect * is activated.
SIMPLY.connect * is active after the function button has been pressed.
The device tries to establish a connection to the SIMPLY.connect * server.
Firmware on USB stick ready to be updated.
Portal configuration on USB stick ready to be transferred.
on
Firmware or configuration is being copied to the device.
Network data transfer active
Transfer rate = 100 MBit/s
Transfer rate = 10 MBit/s
Network data transfer active
Transfer rate = 100 MBit/s
Transfer rate = 10 MBit/s
th
, 2022 |
https://simplyconnect.mbconnectline.com/
Advertisement
Table of Contents
