Table of Contents
Advertisement
12.4.1 Download to PC
Click the icon
to select the transmission type,
and then "Download to PC".
The configuration file "mbconnect24.mbn / -.mbn"
will be downloaded to the configuration PC or
directly to a USB flash drive connected to it.
IMPORTANT: The downloaded "mbconnect24.mbn/.mbnx" configuration file may not be renamed and must
be stored in the top-level directory of the USB drive. The USB drive must have the file format FAT!
12.4.1.1 Importing the configuration into the device
When the mbNET.mini is connected to the power supply and is ready for operation,
insert the USB stick with the configuration file on it into the USB port of the device.
The device will recognize the configuration file and indicate this by the slowly flash-
ing LED Usr (flashing frequency: 1.5 Hz).
As soon as the LED Usr starts to flash
must press the Function button
seconds.
Hold down until the LED Usr lights up
Now release the Function button
When the LED Usr goes off and the LED Pwr
+ Rdy light up, then the configuration transfer
is complete.
If the flashing frequency of the LED Con is 3 Hz, the device is attempting to log into the portal. If the login has been suc-
cessful, the flashing frequency is reduced to 1.5 Hz.frequenz auf 1,5 Hz.
Page 50 von 131 | Version: 2.2.1 - EN | Mar 28
NO T I C E
, you
within 10
.
.
When the mbNET.mini can connect to the In-
ternet (e.g. network cable, SIM card, antennae
installed), the device will subsequently log in to
your account. This is displayed by the flashing
LED Con.
th
, 2022 |
Select this transfer type if the device is neither
connected to a computer via LAN nor has a con-
nection to the
mbCONNECT24
portal.
Advertisement
Table of Contents
