Rata (Relative Accuracy Test Audit); Rata Multiplier; Rata Offset; Set Time - Day - Endress+Hauser SpectraSensors SS2100 Operator's Manual

RATA (Relative Accuracy Test Audit)

The RATA parameter enables or disables user definable values that enable
adjustment (without affecting the factory calibration) of the analyzer reading
in the field [see "Adjusting Analyzer Reading to Match Specific
Standard(s)" on page 2-35]. Enter 0 to disable and 1 to enable RATA.

RATA Multiplier

The RATA Multiplier parameter is a user definable value that enables
adjustment (without affecting the factory calibration) of the analyzer response
(or slope) in the field [see "Adjusting Analyzer Reading to Match Specific
Standard(s)" on page 2-35]. Enter the required value.

RATA Offset

The RATA Offset parameter is a user definable value that enables adjustment
(without affecting the factory calibration) of the analyzer offset in the field [see
"Adjusting Analyzer Reading to Match Specific Standard(s)" on page
2-35]. Enter the required value.

Set Time - Day

The Set Time - Day parameter sets the current day for the clock driving daily
validations. Enter the required value.
Operator's Manual
<SET PARAMETER MODE>
RATA
0
0:Disable 1:Enable
<SET PARAMETER MODE>
RATA Multiplier
1.00000
Enter a value
<SET PARAMETER MODE>
RATA Offset
0.00000
Enter a value
<SET PARAMETER MODE>
Set Time - Day
07
Enter a value (DD)
Operating the Analyzer
–
2 29