1 General Information
1.1 Order number
Two axes positioning controller with programmable output (±10 V differential voltage or 4... 20 mA), ana-
logue or SSI sensor interface and optional synchronous control.
POS-124-U-PFN
POS-124-U-ETC
POS-124-U-PDP
1.2 Scope of supply
The scope of supply includes the module including the terminal blocks which are a part of the housing.
The Profibus plug, interface cables and further parts which may be required should be ordered separately.
This documentation can be downloaded as a PDF file from www.w-e-st.de.
1.3 Accessories
WPC-300
Any standard cable with USB-A and USB-B connector can be used as the programming cable.
Page 5 of 70
Control via Profinet - IO interface
Control via EtherCAT interface
Control via Profibus DP interface
Start-Up-Tool (download: www.w-e-st.de/produkte/software)
POS-124-U
24.01.2022