5.2 Basic parameters
MODE (Switching between parameter groups)
Command
MODE
This command switches between several views on the parameter table. In order to improve the clearness
only the parameters belonging to the chosen group are displayed. There is also an option available to show
all active parameters at once.
5.3 System parameters
LG (Changing the language for the help texts)
Command
LG
Either German or English can be selected for the help texts.
PDPADR (Profibus address)
Command
PDPADR
This parameter only exists for the PDP variant.
Slave address in the Profibus network.
PASSFB (Password fieldbus)
Command
PASSFB
The value inputted here serves as password for the parameterizing via fieldbus. For enabling parameteriza-
tion, it has to be sent via fieldbus to the relating address. For a value of "0" the password protection is deac-
tivated.
Page 23 of 70
Parameters
X
x= SYSTEM|IO_CONF|POS_1|
POS_2|SYNC|EXTRA|ALL
Parameters
X
x= DE|EN
Parameters
X
x= 1...126
Parameters
X
x= 0... 10000000
Unit
-
Unit
-
Unit
-
Unit
-
POS-124-U
Group
BASIC
Group
SYSTEM
Group
SYSTEM
Group
SYSTEM
24.01.2022