Initial Setup; Opening The System & Powering - Media Pointe TAC-CR User Manual

| TAC-CR User Manual 1.0 September, 2022

Initial Setup

Opening the System & Powering
Before powering the system make sure the switch is set to the off position. Then take your provided power
cable and plug into the system. Flip the switch and proceed to open the system by the 4 latches and lifting
the lid.
Upon opening the system locate the power switch on the front
panel and push down on it and release.
This will turn the system on and you should see the screen
light up shortly after.
9 | P a g e