Share Content In A Call - Media Pointe TAC-CR User Manual

Content Sharing

Share Content In a Call

1
Connect the source to the device with
a suitable cable, make sure it has been
switched on and tap Share.
3
To discontinue the preview, tap Stop preview.
To share content with the remote participants,
tap Share in call.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Tap Local preview to view the content to be
shared on your own device only. This will not
be shared with the remote participants.
Tap the X in the upper right corner, as
shown, to return to the previous display.
4
To discontinue sharing content with the
remote participants, tap Stop sharing.
About Content Sharing
Your video device supports the ability
to show presentations in a video call.
If your source device has been
Intelligent Proximity enabled, let
your device pair with the video
device and you can share content
wirelessly.
You can change the layout of the
screen during presentations, see the
following pages for more on this.
Note: Your device may have been
configured to let one of the video
input connectors of your video
device share HDCP protected
content, thus allowing you to watch
video through Google ChromeCast,
AppleTV or a HD TV decoder etc.
This feature is available outside calls
only.
If you attempt to share content
through this specific video connector
while in a call, no content sharing
takes place. Instead, the part of the
screen normally allocated to content
sharingl turns black in order to
maintain the HDCP regime.
This applies to any content you
attempt to share in a call from
this input connector — be it HDCP
protected or not.
24