Use Room Kit Mini As A Usb Camera - Media Pointe TAC-CR User Manual

Use Room Kit Mini as a USB Camera

The Cisco Webex Room Kit Mini may also be
used as a USB camera.
If you did not register your Room Kit Mini with
Cisco, you may use it as any other USB cam-
era.
If you have registered the Room Kit Mini with
Cisco, you can still use it as a USB camera, but
kindly observe the following:
• The Room Kit mini will enter do not disturb
(DND) mode when the software client starts
using the camera, and not when the cable is
plugged.
• This will allow scenarios where a dedicat-
ed computer is connected to the Mini at all
times, but the Room Kit Mini can be still be
used for regular Cisco calls.
To use the Room Kit Mini as a USB camera,
connect it via a USB cable between your com-
puter and the USB-C socket on the Room Kit
Mini.
This configuration will make use of the micro-
phones and the loudspeakers of the Room Kit
Mini, ensuring a great sound experience.
If you want to extend the configuration to in-
clude an external monitor with this setup, con-
nect your computer to the monitor in your usu-
al way.
Camera controls are fully accessible from the
Touch 10 of the Room Kit Mini.
Other Device Settings are also fully accessible,
with the exception of the Do Not Disturb, which
cannot be disabled on a Cisco registered
Room Kit Mini.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
Power
(100-240 VAC, 50/60 Hz)
Used as USB Camera When Already Registered
When placing calls using a third party client,
the camera, microphone and loudspeakers are
selected based on the OS/app. defaults. You
may override these settings.
The camera is controlled from the Touch 10.
To maintain privacy, the camera light indicator
will be illuminated whenever the camera is ac-
tive.
All other functionality is controlled by the third
party client.
Used as USB Camera When Not Registered
The first time you start up a Cisco video de-
vice, the Setup Wizard will appear.
This wizard lets you specify how to register
with Cisco Services (Cloud or on-premises).
The Room Kit Mini provides the option of skip-
ping the wizard if you are going to use it as a
USB device only.
Detailed instructions are provided on-screen to
show you how to do this.
If you later want to register the Room Kit Mini
with Cisco, go to Settings and select Device
Activation.
Connect your computer to
the USB-C socket
adapter
6