Move The Selfview Pip - Media Pointe TAC-CR User Manual

Camera

Move the Selfview PiP

1
Tap and hold the selfview image.
3
Drag the image to a new position, shown here is
the upper left corner.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
The selfview image turns blue. You can
see the alternate positions available for the
selfview image. Keep holding the image.
4
Release the image by lifting your finger from the
screen. The selfview image has now assumed its
new position.
Why Move the Selfview?
Selfview shows what others see
from your device. You can use it to
confirm that they see what you want
them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want
to have the selfview activated
during the meeting. This could, for
example, be to ensure that you
remain seen on the screen.
It may happen that the current
position of the selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.
46