Control Your Own Camera - Media Pointe TAC-CR User Manual

Camera

Control Your Own Camera

Using your camera presets
1
In a call or outside a call (shown here),
tap the Camera icon.
Adjusting your camera's pan, tilt and zoom
4
In a call or outside a call (shown
here), tap the Camera icon.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Select the preset to use.
5
Adjust Pan, Tilt and Zoom. The
selfview is temporarily turned on
to assist you.
3
Tap anywhere outside the menu when
you're done.
6
Tap anywhere outside the menu when
you're done.
About Editing Presets
Existing camera presets can be
used right away during a call.
Your device may have more than
one camera, for example one
camera showing the participants,
while another shows the whiteboard.
If you need to add new or modify
existing camera presets, this is
done in the same way as you do
outside a call. As an alternative
to adding or editing presets, a
simple adjustment of your camera's
pan tilt and zoom should also be
considered.
42