Place A Call From Contact List - Media Pointe TAC-CR User Manual

Video Calls

Place a Call From Contact List

1
Tap the Call button.
4
Key in the name, number, or IP
address.
Matches appear as you type.
Tap and hold * to type the point sign
used in IP-addresses.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
To find someone in a specific list
(Favorites, Directory or Recents), tap
that list and then scroll down to locate
the entry.
5
There is an extended numerical mode
available, which also contains special
characters.
To toggle between the alphanumerical
mode and the extended numerical
mode, tap the key in the lower left
corner of the keyboard.
3
Alternatively, tap the Search or Dial
field. A virtual keyboard appears and
your entry is looked for in all lists.
6
When you have located whom to
call, tap the name and then tap
the green Call button.
About
the Lists of Contacts
Your list of Contacts consists of
three parts:
Favorites. These contacts have
been added by you. These
entries are typically those you call
frequently or otherwise need to
access in a swift and convenient
manner from time to time. A favorite
is denoted by a golden asterisk
Directory is typically a corporate
directory installed on your device by
your video support team.
Recents is a list of calls you have
placed, received, or missed earlier.
The following options apply:
You can key in a name, number or
•
an IP address and the device looks
in all lists for you.
You can add the entry to the list
•
of Favorites; edit aspects of the
entry before calling; change the
call rate and remove the entry from
Recents.
8