Safety Precautions; Environmental Operating Limits Of Tac-Cr; Electrical Requirements - Media Pointe TAC-CR User Manual

Safety Precautions

For your protection, please read all related safety instructions, observe all warnings and precautions, and
exercise common sense while operating this electronic equipment.
Always place the unit on a stable cart, stand or table.
♦
Do not use the unit near water or sources of heat.
♦
Do not drop or shake the unit. Do not place or install the unit in environments where it can be dropped or
♦
shaken.
Make sure the unit is powered off while being moved even for short distances.
♦
Observe the power requirements of the unit; if you are not sure of the power available, consult your
♦
local dealer power company.
When plugging into a power outlet, insert the plug firmly into the outlet. Route the power cord so as to
♦
avoid any activity that may result in fraying or other damage to the cord or the plug.
Under no circumstances should you attempt to override the polarization or grounding protection on the plug.
♦
Do not overload wall outlets, integral convenience receptacles or extension cords.
♦
Unplug the unit from the wall before cleaning. Do not use liquid or aerosol cleaners.
♦
For proper ventilation, do not block the slots and openings. Do not install the unit in a location
♦
where the ventilation slots and openings can be plugged during everyday use.
Do not place or install the unit under, on top of or near any heat-producing equipment (i.e. radiators, stoves,
♦
or
amplifiers), or in a heated place.
Unplug the unit during lightning storms, when it will not be used for extended periods of time, or
♦
before you have a scheduled power outage.
If the unit is visibly damaged either by not observing the precautions above or for any other reason,
♦
contact your local dealer immediately. If the unit does not operate to the specifications set forth in
this user guide, or exhibits a distinct change in performance, this may be an indication of a problem
needing repair.

Environmental Operating Limits of TAC-CR

Operating Temperature: 0°C to 40°C (32°F to
104°F) Relative Humidity: 10% to 90% non-
condensing
Storage & Transport Temperature: -20°C to 80°C (-4°F to 140° F)

Electrical requirements

Input: 100-240V ~50/60Hz
| TAC-CR User Manual 1.0 September, 2022
4 | P a g e