Place A Call Using Name, Number, Or Ip-Address - Media Pointe TAC-CR User Manual

Video Calls

Place a Call Using Name, Number, or IP-Address

1
Tap the Call button.
3
Key in a name, number or address. Possible
matches and/or suggestions sappear as you
type. If the correct match appears in the list tap
that match, otherwise keep typing.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Tap the Search or Dial field. This opens the
keyboard
4
When you have typed or located
whom to call, tap the name and
then tap the green Call button to
place the call.
About Placing Calls
You can call someone who is not
listed in your list of contacts by
keying in their name, address or
number using the virtual keyboard of
the Touch pad.
Anyone you have previously called
or who has called you, appears in
the Recents list and you can transfer
any of them to your list of Favorites.
This is described in the section
Contacts.
Sometimes you need to enter
numbers during a call, typically to
reach extensions or to provide a pin
code.
Tap Touch Tones (this button
appears as soon as the call has
been placed) to invoke the keypad
needed for this.
Note that Recents can be cleared
from the web interface only.
10