Speaker Tracking - Media Pointe TAC-CR User Manual

Camera

Speaker Tracking

1
To enable Speaker Tracking, tap Camera, in the
upper right corner.
3
Tap anywhere outside the menu to exit.
To deactivate Speaker Tracking, repeat the
procedure.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Activate the Speaker Tracking feature by
tapping the button in the upper right corner.
About Speaker Tracking
Devices equipped with a speaker
tracking camera use camera
working together with a built-in
microphone array. The camera
tracks and shows the person
speaking so that you don't have to
use the Camera Control menu or
Camera Presets to zoom in and out.
When speaker tracking has been
activated, the camera position
presets are not available. You must
turn off speaker tracking to get
access to the presets.
Activate speaker tracking as shown
on this page again, if needed.
Note: Speaker tracking doesn't work
if the microphones are muted.
Speaker tracking may be expanded
to include the Snap to Whiteboard
and Presenter Tracking features, as
outlined on the following page.
40