Using The Camera Remote Controller - Media Pointe TAC-CR User Manual

Using the Camera Remote Controller

To set a preset, adjust the camera's angle and zoom, then hold a preset button down until you hear a notification
sound from the camera unit. To recall a preset, simple press the button once.
The camera remote controller is stored
magnetically on the top panel below the
screen. Please remember to return the remote
to this location when closing the system.
| TAC-CR User Manual 1.0 September, 2022
1. Microphone mute (Mutes/unmutes
your microphone so you cannot be
heard. You will see a red light on the
front of the camera when you are
muted and a white light when you
are unmuted.)
2. Volume up/down (These buttons
adjust the speaker volume.)
3. Camera pan/tilt (These buttons
adjust the Up/Down/Left/Right
position of the camera.)
4. Camera presets (These buttons allow
you to save pan/tilt/zoom settings
that you can instantly recall.)
5. Camera home (This button centers
the camera & zooms all the way out)
6. Zoom in/out (These buttons adjust
the camera's zoom.)
12 | P a g e