Manage Selfview - Media Pointe TAC-CR User Manual

Camera

Manage Selfview

Outside a call
1
In a call or outside a call (shown here),
tap the Camera icon.
In a call
1
If you want to turn the selfview off,
while in a call, tap the Selfview avatar,
as shown.
To turn the selfview on, in a call, do as
explained above (Outside a call).
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Tap Selfview to turn it on.
You can resize the selfview image
(see the following page for more),
or control the camera's pan, tilt and
zoom (see the previous page for
more).
Tap Selfview again to turn it off.
2
Tap Turn off, as shown.
3
Tap anywhere outside the menu when
you're done.
About Editing Presets
The Selfview shows what others see
from your device. You can use it to
confirm that they see what you want
them to see.
The Selfview appears as a PiP
(Picture-in-Picture), but you can
maximize it to full screen (see the
next page).
The position of Selfview PiP can be
changed anytime, be it in a call or
outside a call. For details on this see
two pages ahead.
44