Add A Camera Position Preset - Media Pointe TAC-CR User Manual

Camera

Add a Camera Position Preset

1
Tap Camera to invoke the camera
adjustment menu.
4
Key in a descriptive name and tap
Save to put changes into effect.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Selfview will be activated automatically.
Adjust Tilt, Pan and Zoom, as required.
+
Then tap Add new.
5
Tap anywhere outside the
menu when you're done.
3
Tap in the text field.
About Camera Presets
Your device lets you create
predefined zoom and camera
pointing directions (also known as
pan and tilt). Use these to zoom into
the person speaking, if appropriate.
Do not forget to zoom out again
afterwards.
This means that if you want to create
one or more zoom-in presets you
should also create a zoom-out
(overview) preset to conveniently
switch back to overview mode.
Although you may control the far-
end camera, the camera of any
of the other participants (given
that those cameras are remotely
controllable), you can't define nor
make use of their presets.
37