Activate Do Not Disturb - Media Pointe TAC-CR User Manual

Video Calls

Activate Do Not Disturb

1
Tap in the upper left corner, as shown.
D15345.19 Cisco Webex Devices with Touch 10 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Tap Do not disturb, as indicated. To deactivate the feature,
repeat the procedure.
About Do Not Disturb
Your device can be set to not
responding to incoming calls. You
may, however, use it to call others
as much as you want.
Your video support team may have
set a time-out on this feature,
after which the device returns to
responding to incoming calls as
usual. Default time-out setting is 60
minutes.
Note that your video support team
may have disabled access to the set
of menus and options shown.
Using Room Kit Mini as a USB
camera.If you have registered your
Room Kit Mini, you can use it as a
USB camera together with a PC and
a third-party video client. To avoid
conflicts due to overlapping calls,
the device is automatically put in Do
Not Disturb Mode. You can't turn of
Do not diturb mode in this situation.
If you choose to use the Room
Kit Mini as an unregistered device,
the above doesn't apply, since no
overlap of calls happens.
16