Programmable Input 6 - DAAB EP104 Instruction Manual

INSTRUCTION MANUAL DAAB AUTOMATIC CONTROLL UNIT EP104 4.08

Programmable input 6

No. Name
P600 Channels in programmable input 6
0 Disabled
1 Activated (Only channels P660-P698 activated)
2 Safety input (Only channels P640-P643 activated)
P640 Safety function when input is activated
0 Disabled
1 Reverse to fully open
2 Stop with automatic restart of automatic closing
3 Stop, wait for new control signal or time in C520 and thereafter automatic closing.
P641 Safety during run-on time or disengagement angle
in closing movement.
0 Disabled when both halves are in run-on or disengagement angle
1 Activated according to P640
P642 Protection in opening movement
0 Disabled
1 Reverse to fully closed
2 Stop with automatic restart of automatic closing
3 Stop, wait for new control signal or time in C520 and then automatic closing.
4 Stop with restart of opening
P643 Control of external protection connected to INP6
0 No check
1 Test of protection connected to INP6
P660 Control function
0 Disabled
1 Open
2 Close
3 Stop
4 Open/close
5 Open/stop/close
P661 Type of control signal when activated
S
1 Pulse
2 Signal for as long as the input is activated
P662 Half operation
1 Motor 1
2 Motor 2
3 Motors 1 and 2
P663 Limited opening
0 Disabled
1 Opening according to set time in channel C412/C414 or number of degrees in L116/L126 if encoder
is used.
P670 Motor lock
0 Disabled
1 The barrier cannot be operated without a signal at programmable input 6. If the signal disappears the
barrier is stopped.
Instruction manual edition 1 for EP104 version 4.08
Range Factory Setting Ref.
0 - 1 1
0 – 3 1
0 – 1 0
0 - 4 1
0 – 1 1
0-5 0
1 - 2 1
1 - 3 3
0 - 1 0
0 - 1 0
page
31
29
31
31
31
31
31
51