Programmable Input 4 - DAAB EP104 Instruction Manual

INSTRUCTION MANUAL DAAB AUTOMATIC CONTROLL UNIT EP104 4.08

Programmable input 4

No. Name
P400 Channels in programmable input 4
0 Disabled
1 Enabled
P460 Control function
0 Disabled
1 Open
2 Close
3 Stop
4 Open/close
5 Open/stop/close
P461 Type of control signal when activated
S
1 Pulse
2 Signal for as long as the input is activated
P462 Half operation
1 Motor 1
2 Motor 2
3 Motors 1 and 2
P463 Limited opening
0 Disabled
1 Opening according to set time in channel C412/C414 or number of degrees in L116/L126 if encoder
is used.
P470 Motor lock
0 Disabled
1 The barrier cannot be operated without a signal at programmable input 4. If the signal disappears the
barrier is stopped.
P475 Opening via input after activation during set time,
input will not open the barrier until it has been
activated for the set time.
P480 Keep opened
0 Disabled
1 Automatic closing disabled after the input is activated, reset by another control signal
2 Automatic closing disabled by a constant signal
P490 Interlock opening
0 Disabled
1 Opens the local door if P460 is set to open, and passes the signal on to the remote door
P496 Blocking disabled for local and remote doors. Works
only with a constant signal.
0 Disabled
1 Active
P498 Automatic closing disabled for remote door Only
works if there is a constant signal
0 Disabled
1 Active
Instruction manual edition 1 for EP104 version 4.08
Range Factory Setting Ref.
0 - 1 1
0-5 0
1 - 2 1
1 - 3 3
0 - 1 0
0 - 1 0
0.0-9.9 seconds 0.0
0 - 2 0
0 - 1 0
0 - 1 0
0 - 1 0
page
31
31
31
31
31
31
31
31
31
31
31
49