Photocell - DAAB EP104 Instruction Manual

INSTRUCTION MANUAL DAAB AUTOMATIC CONTROLL UNIT EP104 4.08

Photocell

No. Name
C340 Safety function in closing movement
0 Disabled
1 Reverse to fully open
2 Stop with automatic restart of automatic closing
3 Stop, wait for new control signal or time in C520 and thereafter automatic closing.
C341 Safety during run-on time or disengagement angle
in closing movement.
0 Disabled when both halves are in run-on or disengagement angle
1 Activated according to C340
C342 Safety function in opening movement
0 Disabled
1 Reverse to fully closed.
2 Stop with automatic restart of automatic closing
3 Stop, wait for new control signal or time in C520 and thereafter automatic closing.
4 Stop with restart of opening
Check of external protection connected to PHOTO 0 - 1
C343
0 No check
1 Test of protection connected to PHOTO
C351 PHOTO closing
0 Disabled
1 Enabled and subordinated to C340
C354 Type of closing with PHOTO
1 Close immediately if PHOTO is clear
2 Open first then close if PHOTO is clear
Instruction manual edition 1 for EP104 version 4.08
Range Factory Setting Ref.
0 – 3 1
0 - 1 1
0 – 4 0
1
0 – 1 0
1 – 2 2
page
29
29
32
32
39