KYMCO Agility Carry 50i Manual page 154

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Inspection
Measure the brake master cylinder I.D.
Service Limit: 12.75mm
Inspect the master cylinder for scratch or crack.
Measure the brake master cylinder piston O.D.
Service Limit: 12.6mm
Before assembly, inspect the lst and 2nd rubber
cups for wear.
Assembly
Before assembly, apply brake fluid to all
removed parts.
Install the spring together with the 1st rubber
cup.
＊
 During assembly, the main piston and
spring must be installed as a unit without
exchange.
 When assembling the piston, soak the
cups in brake fluid for a while.
 Install the cups with the cup lips facing
the correct direction.
Install the main piston, spring and snap ring.
Install the rubber cover.
Install the brake lever.
12-11
Agility Carry / Delivery
50i