KYMCO Agility Carry 50i Manual page 124

9. DRIVE AND DRIVEN PULLEYS
INSTALLATION
Lay the drive belt on the driven pulley and
install the clutch/driven pulley onto the drive
shaft.
Install the clutch outer.
Hold the clutch outer with the universal
holder.
Install and tighten the 10mm clutch outer nut.
Torque: 3.5~4.5kgf-m
Install the left crankcase cover. (  9-4)
9-11
Agility Carry / Delivery 50i
Clutch/Driven Pulley
Clutch Outer
Universal Holder
Nut