KYMCO Agility Carry 50i Manual page 135

10
Agility Carry / Delivery 50i
. FINAL REDUCTION
BEARING REPLACEMENT
(LEFT CRANKCASE)
Remove the drive shaft.
Remove the drive shaft oil seal.
Remove the left crankcase bearings using a
bearing puller.
Special
Bearing Puller
Bearing Puller, 12mm
Drive new bearings into the left crankcase.
Install a new drive shaft oil seal.
Pilot
FINAL REDUCTION ASSEMBLY
Install the drive shaft into the left crankcase.
Drive Shaft
Install the final gear and final shaft into the
left crankcase.
10-4