KYMCO Agility Carry 50i Manual page 92

6. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER BRACKET
INSTALLATION
Install the engine hanger bracket to the engine.
Install and tighten the engine hanger
bracket bolts.
ENGINE INSTALLATION
Install the engine and tighten the engine
mounting bolts.
Torque: 5.0kg-m
Tighten the rear shock absorbers
mounting bolts.
Torque: Up side 4.0kg-m
Down side 2.5kg-m
Install the removed parts in the reverse
order of removal.
＊
Tire pressure should be checked
when tires are cold.
After installation, inspect and adjust the
following:
Throttle grip free play (3-3)
Agility Carry / Delivery 50i
Engine Hanger
Engine Mounting Bolt
Bracket Bolt
6-6