KYMCO Agility Carry 50i Manual page 115

9. DRIVE AND DRIVEN PULLEYS
LEFT CRANKCASE COVER
REMOVAL
Loosen the drive belt air tube band screw.
Remove the 7 left crankcase cover bolts and
two Anti-modification Bolts .
Remove the seal gasket and dowel pins.
Inspect the seal gasket for damage or
deterioration.
＊
Use specified genuine parts for
replace-ment.
LEFT CRANKCASE COVER
INSTALLATION
First install the dowel pins.
Install the seal rubber.
Install the left crankcase cover and the six left
crankcase cover bolts and two
Anti-modification Bolts .
Connect the drive belt air tube and tighten the
tube band screw.
Install the rear brake cable clamp.
Agility Carry / Delivery 50i
Anti-modification Bolt
Air Tube Band
Anti-modification Bolt
Dowel Pins
Rear Brake Cable Clamp
Bolts
Seal Gasket
9-2