KYMCO Agility Carry 50i Manual page 196

17. LIGHTS/INSTRUMENTS/SWITCHES
Agility Carry / Delivery 50i
HORN
Horn
INSPECTION
Remove the front covers. (  2-2)
Disconnect the horn wire coupler.
The horn is normal if it sounds when a 12V
battery is connected across the horn wire
terminals.
REPLACEMENT
Disconnect the horn wire coupler.
Remover the two bolts attaching the horn.
Remove the horn.
The installation sequence is the reverse of
removal.
Instruments
INSTRUMENTS
Remove the handlebar front cover. (  2-2)
Remove the handlebar rear cover. (  2-2)
Disconnect the handlebar switch couplers.
Remove the three screws to remove the
instruments.
Install a new horn in the reverse order of
removal.
Screws
17-4