KYMCO Agility Carry 50i Manual page 166

13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR WHEEL
REMOVAL
Remove the exhaust muffler. (  2-5)
Remove the rear axle nut.
Remove the rear wheel.
.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limits: 130mm replace if over
INSTALLATION
Install the rear wheel in the reverse order of
removal.
Tighten the rear axle nut.
Torque: 11.0-13.0kg-m
Install the exhaust muffler.
Torque:
Exhaust muffler joint lock nut: 1.0~1.4kgf-m
Exhaust muffler lock bolt: 3.0~3.6kgf-m
＊
First install and tighten the exhaust
muffler joint lock nuts and then the
exhaust muffler lock bolts.
Agility Carry / Delivery 50i
Rear Axle Nut
13-2