KYMCO Agility Carry 50i Manual page 119

9. DRIVE AND DRIVEN PULLEYS
INSTALLATION
Install the drive pulley collar and movable
drive face onto the crankshaft.
Set the drive belt on the drive pulley collar.
Install the drive pulley face and tighten the
drive face nut. (  9-6)
Torque: 5.5~6.5kgf-m
＊
Do not get oil or grease on the drive belt
or pulley faces.
STARTER PINION
REMOVAL
Remove the left crankcase cover.
Remove the drive pulley.
Remove the starter pinion holder.
Remove the starter pinion.
INSPECTION
Inspect the starter pinion shaft forcing part for
wear or damage.
Inspect the starter pinion for smooth
operation.
Inspect the starter pinion and shaft for wear or
damage.
INSTALLATION
Apply a small amount of grease to the starter
pinion shaft and install it in the reverse order
of removal.
Agility Carry / Delivery 50i
Movable Drive Face
Drive Pulley Collar
Starter Pinion
Starter Pinion Shaft
9-6