Setup; Time Zone Adjustment - Auriol 4-LD5380 Usage And Safety Instructions

Hide thumbs Also See for 4-LD5380:
Table of Contents

Advertisement

Available languages

Available languages

Setup

 Set a different channel 1-3 40 on each outdoor sensor.
 Insert batteries into the battery compartment 41 of the
sensors first!
 Then insert batteries into the battery compartment 27 of the
radio-controlled weather station.
Remove the protective film from the radio controlled weather station and the sensors.
Open the battery compartments 41 of the sensors 1-3. Set a different channel 1-3 40 on
each outdoor sensor and insert 2 of the included 1.5 V AAA LR03 batteries
into each compartment in the correct polarity.
The operating LED 38 will light up briefly and the temperature 35, the humidity 36 and
the selected channel 37 will appear. Close the battery compartments 41.
Open the battery compartment 27 of the radio-controlled weather station and insert 3 of
the included 1.5 V AAA LR03 batteries in the correct polarity. Close the
battery compartment 27. A short beep will sound. The temperature 21 and the
humidity 11 will appear. The radio tower symbol
radio-controlled weather station will receive the DCF77 radio signal. This process can
take 3-10 minutes.
! Note: Please do not move the radio controlled weather station or the sensors during
the reception process.
During the reception process, no buttons except the SNOOZE/LIGHT-button 4 will
function.
If the radio signal reception is successful, the time 2, the day of the week 8 and
the date 9 will be set automatically and the radio control symbol
appear on the display permanently.
During daylight saving time DST will appear on the display below the radio control
symbol
6. The radio-controlled weather station will now receive the signals of the
sensors 1-3. This process can take a few minutes. If reception is successful, the signal
reception
17 of each sensor 1-3, the current temperature 15 and the current
humidity 14 will be displayed.
If reception is unsuccessful for 10 minutes, the radio control symbol
Set the time manually (see Basic settings). The radio-controlled weather station will
attempt to receive the DCF77 radio signal at 01:00 o'clock, 02:00 o'clock and 03:00
o'clock. If the radio signal reception remains unsuccessful, the radio-controlled weather
station will attempt to receive the signal again at 04:00 o'clock and 05:00 o'clock and
correct the time automatically if reception is successful.

Time zone adjustment

If you are in a country, in which the current time differs from the received DCF77 time
signal, use the time zone adjustment to set your radio controlled weather station to
another time zone than the default setting (UTC + 1 = Central European Time). Set the
difference in hours of your time zone (for example -01) to Central European Time.
Press the SET-button 32 1 x long and 6 x short while in normal time display mode. The
time zone (00) will blink on the display and can be set by pressing the
or the
down button 26. Press the SET-button 32 to confirm your setting. The radio-
controlled weather station will now immediately show the changed time (for example:
one hour less). Press the SET-button 32 repeatedly until the normal time display is shown.
6 will blink on the display and the
6 will
6 will disappear.
up button 25
- 45 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

341189 1910

Table of Contents