First use
Before use, insert the battery first into the
outdoor sensor and then into the tempera-
ture station.
Requirements at the setup location
►
►
►
♦
♦
■
_320042_AFT77A1_Funk-Temperaturstation_LB9.indb 10
When selecting the setup location, make
sure the devices are not exposed to direct
sunlight, vibration, dust, heat, cold or
humidity .
Do not set up the device near sources of
heat, e .g . heaters .
Mount the outdoor sensor within a max-
imum radius of 98 ft to the temperature
station . Make sure there are no interfering
obstacles between the outdoor sensor and
the temperature station . Otherwise, there
could be transmission interference .
Both the temperature station and the
outdoor sensor can be suspended from a
screw using the hooks 7 and t .
Alternatively, you can fold out the
stands w/p of the temperature station
and the outdoor sensor to set them up on
an even, horizontal surface .
│
10
US - EN
AFT 77 A1
08.03.19 09:3