Table of Contents
Advertisement
Make a support according to the chart shown above. Then use suitable bolts and
nuts to secure the camera on the support. The support should be able to bear more
than 100kg.
2.1.2 Aviation Plug Installation
Figure 2-3 Aviation Plug Hole
Figure 2-4 Aviation plug Pin
When installing, please insert the head hole into the socket, make sure that the pin is
inserted into the socket, then twist the upper fixed ring upward and to the right, and
then complete the docking after hearing "Click".
When removing the plug, please twist the plug to the left, the plug will be removed,
with the pin plug separation.
Aviation plug retaining ring
Figure 2-5 Aviation Plug Finished Installation
12
Advertisement
Table of Contents
