Table of Contents
Advertisement
1. Introduction
Following the high standards of GRUNDIG IP Cameras, this IP Camera is capable of serving real-time streaming
and makes the images run smoothly (25 images/second).
In addition to MJPEG real time streaming, this IP Camera develops a superior H.264 main profile codec to
smoothly transfer High Definition surveillance data through the Internet without distortion. Attributing to the IP
Camera's flexible platform, the camera can be applied in various installation locations including shops, stores,
banks, parking lots, factories and building surveillance.
With the Power over the Ethernet (IEEE 802.3af) feature, the need of power outlets could be totally eliminated.
Likewise installation and cabling cost can be significantly reduced. Additionally, its light weight and compact size
offer a quick and simple installation on ceilings or walls of houses and vehicles.
2. Important Safety Instructions
Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter
could cause fire, electrical shock, or damage to the product. Incorrectly connecting the power supply may cause
explosion, fire, electric shock, or damage to the product. Do not connect multiple products to one single adapter.
Exceeding the capacity may cause abnormal heat generation or fire.
Do not place conductive objects (e.g. screwdrivers, coins or any metal items) or containers filled with water on
top of the product. Doing so may cause personal injury due to fire, electric shock, or falling objects.
If any unusual smells or smoke comes out of the unit, stop using the product. In this case, immediately
disconnect the power source and contact the service center. Continued use in such a condition may cause fire or
electric shock.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this
product in any way. (GRUNDIG is not liable for problems caused by unauthorised modifications or attempted
repair.)
To prevent fire or electric shock, do not expose the inside of this device to rain or moisture.
3. Package Contents
These parts are included:
4. Installation
Do not install the product in a location subject to high temperature (over 50°C), low temperature (below -10°C),
or high humidity. Doing so may cause fire or electric shock. Keep out of direct sunlight and heat radiation
sources. This may cause fire. Avoid aiming the camera directly towards extremely bright objects such as the sun,
as this may damage the image sensor.
Do not install the unit in humid, dusty or sooty locations. Doing so may cause fire or electric shock. Install it in a
place with good ventilation.
2
English
Advertisement
Table of Contents
