Troubleshooting - Fisher & Paykel DE7060P2 Installation Manual/User Manual

The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Fisher & Paykel trained and supported service technician.
PROBLEM
Pressing 'Power'
does not turn
on the dryer
Touching
does not start
the drying cycle
Dryer keeps
stopping and
starting
Dryer stops
working mid-
cycle
Dryer is taking
too long/
results were not
satisfactory
Clothes getting
too hot or
damaged

TROUBLESHOOTING

POSSIBLE CAUSES
Fault with household
power supply.
Dryer could be displaying a
user warning or fault code.
'Delay Start' function is set.
The 'Wrinkle Free' option has
been selected.
Power failure.
Dryer has been paused.
Dryer door is open.
Drying cycle selected not
appropriate for the load.
Dryness level selected not
appropriate for the load.
Selected drying temp, not
appropriate for the load.
Dryer overloaded for
the cycle.
Lint filter is blocked.
Load overly wet at the start
of cycle.
Cycle selected not
appropriate for the load.
Items removed from dryer
before the end of cycle cool
down had finished.
WHAT TO DO
Try plugging in and turning on
another electrical appliance.
Refer to page 28.
Refer to page 26 for more
information.
Refer to page 25 for more
information.
Press 'Power' and restart the
desired cycle.
Touch the button to restart
the cycle.
Ensure the door is firmly shut.
Select an appropriate cycle for the
load. Refer to pages 19, 21
and 22.
Select a higher dryness level.
Refer to page 24.
Select a higher drying temp.
Refer to page 23.
Some cycles have a lower max. load
size. Refer to pages 22 and 23.
Try dividing the load in half and dry
half at a time.
Clean the lint filter.
Remove more water from the
load before placing it in the dryer,
eg select a faster spin on your
washer, a speed appropriate for
your load.
Ensure the cycle selected is
appropriate for items in the load.
Refer to pages 19, 22 and
23.
Removing items before cool down
may damage clothing if it is not
spread out and exposed to cooler air
once removed from the dryer.
29