Table of Contents
Advertisement
Quick Links
Installation instructions
Please read and follow the
Accessories
Please check you received the following accessories with your Fisher & Paykel dryer. You will find them inside the drum:
• 1 x Drying rack (DE6060P and DE6060G only)
• 1 x Installation instructions and user guide
• 1 x Wall mounting kit
• 1 x Duct adapter
Unpacking
To ensure the best performance from your new dryer please follow the instructions below.
Removing the packaging
1. Remove the outer packaging (including the polystyrene packer and plastic wrapping). All packaging must be
removed prior to use.
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/03_Installation_instructions
'Safety and
warnings' and 'Installation instructions' sections carefully before using your dryer!
Updated: Sat, 07 Jul 2018 04:48:17 GMT
Powered by
1
Advertisement
Table of Contents
Related Manuals for Fisher & Paykel DE6060P
Summary of Contents for Fisher & Paykel DE6060P
-
Page 1: Installation Instructions
Accessories Please check you received the following accessories with your Fisher & Paykel dryer. You will find them inside the drum: • 1 x Drying rack (DE6060P and DE6060G only) • 1 x Installation instructions and user guide • 1 x Wall mounting kit •... - Page 2 • Ensure packaging materials are kept out of reach of children. • Please help protect the environment and dispose of the packaging from around the dryer in an environmentally friendly manner. 2. Tilt the dryer backwards and ‘walk’ it off the base one foot at a time. Not doing so may cause damage to your floor and dryer.
-
Page 3: External Venting
External venting Your dryer has been designed to be vented outside to provide the following advantages: • Ensures optimum efficiency by preventing recirculation of moist air. • Eliminates condensation on walls and ceilings. • Reduces the chance of lint being sucked into the dryer. •... -
Page 4: Free Standing
Free standing The dryer stands on the floor and can easily be moved into position. 1. Move the dryer into the desired position. Do not lift the dryer by the top panel. 2. Have a minimum clearance on all sides of at least 20 mm. -
Page 5: Front Venting
replace with the outlet cover from the rear left-hand side. These covers should be gently pried at the sides to prevent damage. Front venting Front venting is the only recommended option for venting into the room. The dryer is set up for front venting when it leaves the factory. -
Page 6: Inverting The Panel
• 6 x Screws for hanging hooks and plastic spacers Inverted wall mounting Inverting the panel 1. Unplug your dryer from the wall. 2. Invert the panel of the dryer by unscrewing the screws on the side of the console (A). 3. - Page 7 https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/03_Installation_instructions Updated: Sat, 07 Jul 2018 04:48:17 GMT Powered by...
-
Page 8: Mounting Dryer On Wall
Mounting dryer on wall 1. Determine the position of the dryer on the wall and mark the bracket position. A minimum of 50 mm is needed between the top of the dryer and the ceiling for ease of installation. If mounting above a washing machine, allow sufficient room to open the lid of the washer. -
Page 9: External Venting Options
External venting options • The dryer can be vented with a kit that can be positioned to vent upwards or to the side. Kit part number PD-DK4W. • The dryer can be vented directly through the wall with Kit part number PD-SVHCW4, in combination with the duct adaptor supplied with the dryer. -
Page 10: Completing The Installation
Through-wall mounted ducting • Do not touch or operate the dryer with wet hands or with bare-feet. • A damaged power cord must be replaced by a Fisher & Paykel trained and supported service technician. The appliance must not be operated until it is repaired, as there is risk of electric shock. •... -
Page 11: Product Specifications
2. Is the lint filter correctly in place? 3. Has the power cord been connected to an appropriate power supply and the power turned on? 4. Have you performed the installation test cycle? Product Specifications DE6060P & Property DE5060G DE6060G Capacity (kg)* https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/03_Installation_instructions... -
Page 12: Dimensions (Mm)
Dimensions (mm) DE6060P & Property DE5060G DE6060G Width Depth Height Electrical DE6060P & Property DE5060G DE6060G Volts 220 – 240 220 – 240 Amps (maximum) Rated Power (W) 1750 1750 *Capacity refers to the maximum dry weight of items the dryer can dry at any one time.
Need help?
Do you have a question about the DE6060P and is the answer not in the manual?
Questions and answers