Dryer Controls - Fisher & Paykel DE7060P2 Installation Manual/User Manual

SmartTouch™ Control Dial
The SmartTouch™ Control Dial (DE7060P only) provides
easy and efficient drying cycle selection. As you rotate
the dial, the icon of the drying cycle selected will be
illuminated, along with the default settings for that
cycle on the right side of the control panel.
SmartTouch™ buttons
The smooth, easy clean buttons enable easy selection
of options with lights clearly showing the selections
you are making.
Digital display screen
The digital display screen provides feedback on
how long the drying cycle has to go. If you have
programmed a 'Delay Start', the time remaining until
the cycle will start will be displayed here, along with
any messages to help you with the overall running
of your dryer (eg user warnings).
Time to go
Your dryer displays approximately how many minutes
the cycle you are running has remaining if you have
chosen one of the Time Dry cycles. If you have chosen
an automatic cycle the word
the screen.
Be aware that a number of factors can influence the
overall cycle time, eg the fabric type and construction
of garment, load size, how wet the load is, etc.
Progress lights
The progress lights indicate what part of the cycle
the dryer is currently on ('Damp', 'Dry' or 'Cooling').
All three lights are on at the beginning of the cycle.
The light for the current part of the cycle flashes,
and each one goes out when that part of the cycle
is complete.
Keylock
Keylock can be used to lock the buttons on your dryer.
This will avoid accidental button touches. For more
detail refer to the 'Drying cycle options' section.
18

DRYER CONTROLS

will appear on
SmartTouch™ Control Dial
SmartTouch™ buttons
Digital display screen
Time to go
Progress lights
Keylock mode