System Requirements - ST X-NUCLEO-IDB04A1 User Manual

Bluetooth low energy expansion board based on bluenrg for stm32 nucleo

Hide thumbs Also See for X-NUCLEO-IDB04A1:

Table of Contents

Getting started

1.2

System requirements

Using the Nucleo boards with the X-NUCLEO-IDB04A1 expansion board requires the

following software and hardware:

a Windows PC (XP, Vista, 7, 8) to install the software package

a USB type A to Mini-B USB cable to connect the Nucleo to the PC

Installation of the board firmware package (order code: X-CUBE-BLE1) and the BlueNRG

graphical user interface utility on the user's PC requires the following:

At least 128 MB of RAM

40 MB of hard disk space available

The X-CUBE-BLE1 firmware and related documentation is available on www.st.com.

4/15

DocID026346 Rev 4

UM1765

Table of Contents

Do you have a question about the X-NUCLEO-IDB04A1 and is the answer not in the manual?