Installing A So-Dimm Memory Module - Nexcom Neu-X300-F65 Series User Manual

Chapter 3: System Setup

Installing a SO-DIMM Memory Module

1. With the bottom cover removed, install a memory module in the SO-
DIMM socket. Insert the module into the socket at an approximately
30-degree angle. Push the module down until the clips on both sides of
the socket lock into position. The gold-plated connector on the edge of
the module will almost completely disappear inside the socket.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
34
Neu-X300-F65 Series User Manual